Quick Actions

Contact

Get a Quote

img

Ditch Cleaning MachineNM-Truck (7 Ton)

The NM-Truck is a 7-ton truck-mounted hydraulic boom and bucket unit for cleaning roadside open drains and ditches — the largest unit in the NM-series range, with the deepest reach and the largest collection body.

Page last updated: September 9, 2026

How It Works

The NM-Truck draws hydraulic power from the vehicle's own engine through a fitted PTO. The operator sits at the machine itself, directly beside the ditch, rather than offset at the center of a backhoe — making it far easier to judge reach and avoid damaging the ditch side walls. A telescopic side-hoe box section extends up to 800mm for better reach and visibility into the ditch, while the articulated-cum-telescopic boom — mounted on a heavy-duty slewing ring bearing — swings through 90 degrees and reaches up to 5m out and 3m deep. The bucket scoops silt and solid material out of the ditch and empties it directly into the truck-mounted collection body, eliminating the need to re-handle silt dumped on the ground. Once full, the body hydraulically tips to empty at the disposal site.

Key Features

  • Mounted on a 7-ton GVW truck chassis with a 3800mm wheelbase, hydraulics driven off the vehicle's engine PTO
  • Articulated-cum-telescopic boom on a heavy-duty slewing ring bearing, with roughly 5m of arm radius and 3m of working depth
  • Hydraulically operated telescopic side-hoe box extension, up to 800mm, for reach and visibility into the ditch
  • 2.5-3 cum hydraulic tipping collection body, tipping angle 40-45 degrees
  • Two independently operated hydraulic stabilizers for stability during operation
  • 60-liter minimum oil tank with suction strainer, oil level gauge, and return line filter
  • Two-coat epoxy primer plus PU/synthetic enamel finish for corrosion resistance

Bucket Options

The NM-Truck ships with the standard ditch bucket, and can be quick-attached with a 4-jaw grab bucket on the same boom for a different kind of job:

  • Ditch Bucket (standard) — a 0.05 cum (50 kg), 300mm-wide scoop bucket built to lift silt, mud, and sediment out of a narrow ditch without disturbing the side walls
  • 4-Jaw Grab Bucket (optional) — a wide clamshell-style bucket with four jaws instead of a fixed scoop, rated to the same lifting capacity as the ditch bucket. Its open-jaw design suits picking up loose, irregular material like roadside litter and garbage, or waste at a landfill site, rather than digging into compacted silt

Swapping between the two is a quick-attach change on the same boom — no other modification needed.

Ideal For

  • Deeper or wider ditches beyond the reach of the trailer or 4-wheeler units, down to about 3m and out to about 5m
  • Municipalities and contractors needing the largest collection body in the range (2.5-3 cum) to minimize trips to the disposal site
  • Sites that also need periodic roadside or landfill garbage collection via the optional grab bucket

Request Full Specification

Enter your details below and we'll email you the complete specification sheet for this model, along with a photo so you know exactly which unit you're looking at.

Frequently Asked Questions

How deep and how far can the NM-Truck reach?

Down to about 3 meters below ground level, with an arm radius of roughly 5 meters — the deepest and widest reach in the NM-series range.

Can the NM-Truck collect roadside garbage, not just silt?

Yes — a 4-jaw grab bucket is available as a quick-attach option on the same boom, rated to the same lifting capacity as the standard ditch bucket, and suited to loose garbage or landfill waste rather than compacted silt.

How big is the collection body?

2.5 to 3 cubic meters, with hydraulic tipping to empty at the disposal site — the largest body in the NM-series range.

How is the NM-Truck different from the NM-Bolero?

The NM-Truck reaches roughly 5m out and 3m deep, compared to the NM-Bolero's 3.3m outreach and 1.5m depth, and carries a larger collection body — better suited to deeper, wider ditches and higher-volume jobs.