Get Your Free Quote…!
Compact articulating boom for lifting into tight, obstructed spaces.
View Details →
The TM-JSR7000 is Maniar's highest-capacity JSR-configuration multi-function sewer cleaner, mounted on a 16-ton chassis, combining high-pressure jetting, vacuum suction, and mechanical rodding in a single unit — cutting down on the number of separate machines a crew needs to keep on hand.
Page last updated: September 9, 2026
Jetting: a 267 LPM / 150 bar triplex plunger pump, driven by a full-torque split-shaft PTO, forces water through a 1" x 60m hose and a self-propelled nozzle that pulls itself forward through the line, breaking up blockages and flushing debris out ahead of it.
Suction: a 540 cum/hr vacuum pump — the highest flow in the JSR range — generates high vacuum in the sludge tank to siphon effluent, liquids, and settled sludge through a 4" x 15m hose. A sludge stirring arrangement converts solid silt into a slurry the pump can draw up, and a blow-back system discharges just the water content of the tank so the load carries away the sludge without hauling unwanted water weight.
Rodding: a trolley-mounted rodding machine screws flexible steel rods end to end and guides them into the line, then pushes the rod forward and pulls it back to break up the clog mechanically — effective where jetting alone can't clear a hard obstruction.
A trolley-mounted sewer rodding machine works alongside the jetting and suction systems to clear blockages mechanically. Several flexible 7mm x 1m steel rods are screwed end to end and guided into the line, then pushed forward and pulled back to break up the clog.
Every 3-in-1 multi-function sewer cleaner ships standard with two nozzle types:
Additional nozzle types can be supplied to match specific jetting jobs, including penetrators, root cutters, descaling nozzles, and rotating nozzles.
Enter your details below and we'll email you the complete specification sheet for this model, along with a photo so you know exactly which unit you're looking at.
High-pressure jetting, vacuum suction, and mechanical rodding, all on one 16-ton chassis — the largest capacity in the JSR range.
Both options are available — a 5Hp air-cooled diesel engine or an AC electric motor, so you can choose based on power access at the job site.
From about 750/1000mm up to 1500mm (30-60 inches) in diameter, using its 267 LPM / 150 bar jetting pump.
A 4" (100mm) hose, matched to its 540 cum/hr vacuum pump flow — the highest suction flow in the JSR range.
